Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
New in ME 1.20! Attach a discussion forum from a course website to a gradebook assessment to allow faculty to grade discussion posts.
To attach a Course Discussion Forum to a Gradebook assessment, you must have the following in place:
Your Course Website must be associated with a Curriculum Period.
Your Course Website must have a Discussions page type containing at least one Forum.
Create a Gradebook assessment.
Click the checkbox beside Attach a course discussion to this assessment for grading.
The checkbox is below the area where you define the assessment characteristic, marking scheme and grading scale.
From the Select a Discussion to Grade dropdown menu, select one or more forums that you want to associate with the assessment.
If you select more than one forum, your grader(s) will be able to switch between forums to access the learners posts and replies for each.
Assign your learners to Assessment Graders as required.
Optionally, attach an Assessment Form to assist your graders in grading the discussion forum.
Optionally, create an Assignment Dropbox for the assessment, if the learner is also required to make a submission.
Click Save.
Before you start, ensure that the curriculum period (e.g., Sept. 1, 2021 – Dec. 31, 2021) you want to create a new gradebook for exists and has an audience (e.g., a cohort). Navigate to Admin > Manage Course > Setup to review and adjust this as needed.
Navigate to Admin > Manage Courses.
Search for a course as needed.
Click the cog icon to the right of the course name and select Gradebook.
Ensure you are in the correct curriculum period and adjust using the period selector in the top right if needed. (The current curriculum period will display by default.)
Select the assessments you want to copy by ticking the small box beside the assessment title.
Note that you can select all by ticking off the box beside the Assessment column title.
If you want to copy a collection .**
Click 'Copy Selected'.
In the window that opens, select the new target course and enrolment/audience (you will see the audience and relevant cperiod in the selector).
Click 'Copy Assessments'.
To view your newly copied course gradebook either use the cperiod switcher in the top right (if you copied to the same course), or navigate to a different course and view the gradebook for the appropriate curriculum period.
What is copied:
Assessment and collection titles and weights including previous assessment details (assuming you checked off a collection)
You must update any applicable due dates, Show Start dates, etc. for the newly copied gradebook assessments.
A drop box will be copied in the same course when you copy to a new curriculum period, but you'll need to update the dates
Drop box assignments will not copy across courses!
A form attached to a gradebook assessment will be copied so it can be used again if appropriate.
Curriculum tags assigned to assessments will be copied.
What is NOT copied:
Specific assessment audiences will not be copied - you will need to specify the audience for any assessment you don't want to apply to the entire cohort.
Course Gradebook Grading Scale (assessments' grading scales will copy)
Assessment Events
Assessment Graders
Attached Assessment Portfolios
Navigate to a course gradebook.
Click on the pencil icon in the Edit column.
Navigate to a course gradebook.
On the list of existing assessments check off the box beside the assessment you want to delete and then click the red “Delete Selected” button at the bottom left.
The collections tool allows you to group multiple assessments together in a course gradebook assessment list allowing for quick review of learner performance (e.g., all quizzes will show up beside each other).
Create the required assessments.
Tick the small boxes beside the assessments you want to add to a collection.
Click on “Add to Collection” at the bottom of the gradebook screen.
Provide a title and optional description for the collection.
Set the grading scale as necessary.
Set how to display grades for the collection to the learner.
Click '+Add to Collection'.
The collection will now display on the Assessments list.
To add additional assessments to an existing collection, tick the small box to the left of the assessments you want to add. Click on Add to Collection. Under Assessment Collection use the dropdown menu to select the appropriate collection title and click Add to Collection.
To deleted a collection, tick the small box beside the collection name and then click the red “Empty Collection” button at the bottom of the page.
Weighted Collections gives users the opportunity to create provide a total course weight for a selection of assessments (e.g. all quizzes will be worth a total of 20%) and then have Elentra automatically calculate the weight of individual assessments based on the total weight of the collection.
This development was initially designed to support schools using point totals (numeric grades) as the basis for multiple assessments.
Create the required assessments.
Tick the small boxes beside the assessments you want to add to a collection.
Click 'Add to Collection' at the bottom of the gradebook screen.
Provide a title and optional description for the collection.
Set the grading scale as necessary.
Set how to display grades for the collection to the learner.
Check the "This Collection is Weighted" option which will open additional options. Complete the information, noting the following:
Total Weight of the Collection in Course Gradebook: This should reflect how much you want this collection to be worth in the total gradebook (e.g. all quizzes will be worth a total 20% of the course gradebook)
Distribute Weight of Assessments Using: This allows you to specify how you'd like to calculate the weights on individual assessments added to the collection. The options are Numeric Points or Percentage.
If you select numeric points, you'll initially see the existing points total and weight for each assessment. When you enter a total weight for the collection, the weight of each individual assessment will automatically adjust.
If you select percentage, you'll initially see the original percentages assigned to each assessment. If you enter a total weight for the collection, you will need to change the weight of each assessment to total 100%. The Assessment Weight in the Course Gradebook will automatically be calculated.
Gradebook Assessments in Collection:
Numeric Points: You can adjust the points assigned to any assessment in the collection. This will override the previously entered points total.
Percentage: You can adjust the percentages which will override the percentage weights entered when creating the original assessment.
Click '+Add to Collection'.
The collection will now display on the Assessments list. The weight column will show the total collection weight beside the collection name and the weight within a collection for each individual assessment.
Note that Elentra allows a gradebook to have a total weight of more than 100%. Especially when using weighted collections, ensure your gradebook total weight is what you want it to be.
To edit an existing collection, click the pencil icon in the edit column to the right of the collection name.
It is only by editing assessments through the collection that you can change the numeric points or percentage and have it reflected in the collection. If you edit an individual assessment that is part of a collection, you can modify the points, but the weight will not automatically adjust.
Gradebooks automatically exist for courses and all their associated curriculum periods, however each gradebook must be populated with assessments. Once you have assessments in one gradebook, you can copy and apply them to new curriculum periods and courses as needed.
You must have staff:admin permissions or be a program coordinator or faculty director associated with a course in order to access assessments in a course gradebook. Only staff:admins and program coordinators can add new assessments (course directors can edit existing assessments).
One reason to set a grading scale for a course gradebook before doing anything else is that if a grading scale is set for a course gradebook, all assessments added to the gradebook will inherit the course grading scale. This can be a time saver if you use the same grading scale for multiple assessments in the a gradebook. Note that users can optionally change the grading scale of an assessment when it is being made.
Navigate to Admin > Manage Courses.
Search for a course as needed.
Click the cog icon to the right of the course name and select Gradebook.
Ensure you are in the correct curriculum period and adjust by using the period selector in the top right if needed.
Below the list of assessments and beside the options to delete and copy assessments, look for the Grading Scale dropdown selector.
Select the appropriate grading scale.
The selected grading scale will display in the grading scale space.
Navigate to Admin > Manage Courses.
Search for a course as needed.
Click the cog icon to the right of the course name and select Gradebook.
Ensure you are in the correct curriculum period and adjust by using the period selector in the top right if needed.
Click 'Add New Assessment' (right side).
Fill in the required fields.
Assessment Name: Required; will display to learners and any graders associated with this assessment.
Assessment Description: Optional; this will be displayed on the Edit Assignment screen, will be seen by learners when reviewing or submitting an assignment tied to this assessment, and will also display if you choose to include this assessment in the gradebook display on a course website.
Assessment Weighting: This can be left as 0% if an assessment carries no weight towards the final course grade. Otherwise, enter the weight this assessment will have towards the final course grade.
Audience Options: Use this optional field to create an assessment for a specific course audience. Your options are for the entire course enrolment, a course group or groups, specific cohorts or individuals in the course, or a custom list of learners.
Click the radio button for the appropriate audience option and then select the audience using selector. Note that you can search the list of cohorts/groups/learners as needed.
If you assign the assessment to specific course groups and you want all learners in one group to have the same grade recorded, check off "Apply the same grade to all learners in the selected groups." If you use this option and an assignment drop box, one member of the group can upload the assignment and once graded, the mark will be applied to all group members.
If an assessment is assigned to a specific audience only those learners will see the assessment in their My Gradebook view (assuming the assessment is released for view) and have its weight (if any) applied to their grade calculation.
Notify if grade is below: Use this feature to automatically send an email to the selected audience if students score below the designated threshold.
Check the box on the left to enable this feature.
Enter a threshold (e.g. 65%) and click 'Select Who Gets Notified' to add the name(s) of people to notify. The options available will be based on the course contacts (e.g. course director, curriculum coordinator, and associated faculty).
If no options appear, make sure the course has course contacts on the Course Setup page. Note that you can add multiple people to the list. To remove someone from the list, click the red minus button beside a name.
Assessment Due Date: This is not a required field but if used will create a due date visible to learners. If the assessment later has a drop box assignment added the drop box assignment will inherit the assessment due date.
Learners are required to complete this assessment: This creates a flag in the database for this assessment but does not impact the learner's experience.
Characteristic: Required; this is assessment type (test, paper, oral exam, etc.). The list of assessment characteristics can be modified in Admin > System Settings. Please see details here.
Selecting different assessment characteristics will dynamically open additional fields:
Track Late Submissions: This adds a late submission column that allows you to identify students who have submitted assessments late with a checkmark. This will be visible in the course gradebook.
Track Resubmissions: This adds a resubmission column that allows you to identify the number of times a student had to resubmit an assignment.
Extended Options: This allows you to define the type of questions used in the assessment. This stores information but is not currently used in reporting, nor is it visible to learners.
Marking Scheme: Elentra supports Pass/Fail, Percentage, Numeric, Complete/Incomplete, Grading Scale and Floating Numeric marking schemes.
If you choose Numeric you'll be prompted to ender the maximum points for the assessment (i.e., the denominator in the score). When entering grades you'll enter the numerator in the score.
If you chose Grading Scale as a marking scheme it means users will be able to choose from the grading scale characteristics (e.g., Honors, High Pass, Pass, Fail) to enter grades.
Floating Numeric can be used for numeric grades that do not have a denominator. Note that grades using this marking scheme can only have a weight of 0%.
Each marking scheme is stored in the database as a percentage value (e.g. P = 100, F = 0).
Grading Scale: Optionally set a grading scale for an assessment. (If you chose Grading Scale as your Marking Scheme make sure to select a Grading Scale!)
Note that if a grading scale was set for the entire course gradebook, that grading scale will be selected by default for newly created assessments. Users can edit the grading scale as needed.
If a grading scale is used, you can control how the learner will view their results (e.g. see grading scale, marking scheme, both). The option to set how learners view their results will be visible if you select "Show this Assessment in Learner Gradebook" further down the page.
The list of grading scales can be configured in Admin > System Settings. Please see more detail here.
Assessment Type: Formative and Summative are the options. Typically, formative assessment is to monitor student learning and provide ongoing feedback, and summative assessment captures overall student learning at the end of an instructional unit. You may wish to check with your institution’s student assessment coordinator or education consultant to clarify how your institution uses these terms. The number of formative and summative assessments in a course is reported by course in the Assessment Summary Report.
Narrative assessment: Check this off if students receive written feedback for this assessment. This information is reported by course in the Assessment Summary Report.
Self-assessment: Optionally check this off if students are assessing themselves. This does not give the learner the ability to enter his/her own grade in My Gradebooks, however it will prevent any other grader associated with this task from grading it.
There is no existing report that displays which assessments are flagged as self-assessments, however a developer might be able to retrieve it from the database if required.
Show Assessment details to learners in the Gradebook and Course Website
Check this box if you wish to show the assessment to learners in their My Gradebook view (whether or not a grade is entered), AND you want to show this assessment on the course website if you include a Gradebook page (visible to learners, faculty, and staff).
Note that displaying assessments using the above option won't display individual grades associated with them.
Show Grade in the learner's Gradebook
Check this to control if and when to show a grade for the assessment in the learner's My Gradebook view.
Set the appropriate start and finish times. Students will be able to see this assessment grade during the active date range. If you enter grades after the designated start time, students will see their grades immediately when you save your work.
Choose how to display grades to the learner. Optionally select to show them the marking scheme, grading scale, or both.
Note that the green checkmark that displays in the Gradebook overview page shows whether a gradebook assessment is set to be visible in general (i.e., in the learner's gradebook and on the course website if a Gradebook page is in use). It does not currently reflect whether the assessment is set up to display an individual's grade to them.
Linking an event to an assessment in the gradebook allows you to provide data for the AAMC Curriculum Inventory Portal.
Click 'Attach Learning Event'.
Begin to type the learning event name and click on the appropriate event when you see it. You will only be able to pick from events associated with the specific course/program you’re working on. If an event you expected to see is not visible, check that the event is assigned to the course you are in, and that you are working in the correct curriculum period.
Click 'Attach Learning Event'. The event should now display on the Edit Assessment page. When you visit the event page as an admin., you'll see the event type displayed in the event information overview in the top left. You can also link to the assessment from there.
Note that you can only link an assessment to one event.
This allows you to give specific faculty or learners designated as TAs for a course access to view assignments and enter assessment grades for their assigned learners. First add graders to the list, and then assign learners to the graders. Currently, each student can only be assigned to one grader.
Graders will not save unless they have been assigned learners.
To add graders:
Begin to type a grader name into the search field and when matches appear, click on the appropriate name and select Add.
You may add multiple graders to one assessment.
Note that to add a student grader to an assessment and have them successfully access their grading tasks, the student must be listed as a Teaching Assistant on the Course Contact list managed on the course setup tab via Admin > Manage Courses. (The user interface in the gradebook will appear to let you add a student not assigned as a TA to the assessment, but the user won't be able to access the course via My Grading Tasks.)
If you assign multiple graders to an assessment you can distribute learners to the graders randomly or manually. (Note that if you have set an assessment as a group assessment the interface will look slightly different. Please see more details on the Group Assessments page.)
To randomly assign learners to graders click the blue “Randomly Distribute Learners to Graders” button.
To manually assign learners to graders, click the checkbox beside multiple learner names and click 'Assign Selected to Grader'.
In the popup window, click the checkbox beside the appropriate grader name click 'Assign Learner'.
The selected learners should appear beside the grader name in the Grader/Assigned Learners table on the left.
To delete a learner from a graders list, click the red minus icon.
To delete a grader, check off beside the grader name and click the "Remove Selected Graders" button. If a grader you remove had learners assigned to him/her, those learners will automatically return to the Learners list on the right.
Linking a gradebook assessment to an existing portfolio allows course directors, and curriculum and program coordinators to access portfolio entries while in the gradebook. This can be particularly useful if a form is also attached to the assessment and the user can see a portfolio entry and assessment form simultaneously. Linking a portfolio to a gradebook is a setting option that can be turned off if desired.
Please note that at present portfolio artifacts are not available to be viewed by individual graders (i.e., if you've added graders to a gradebook assessment). Portfolio artifacts can only be viewed by users with access to Admin > Manage Courses > Gradebook (e.g., course director, curriculum coordinator).
To link a portfolio to an assessment:
Click 'Attach Portfolio'.
If no Portfolios appear for you to select, make sure you are working in the correct curriculum period and that the affiliated cohort has an active Portfolio.
Select the appropriate portfolio and click 'Attach Selected Portfolio'. The name of the portfolio should display underneath the Assessment Portfolio heading.
If you've added a portfolio to a gradebook assessment but aren't seeing anything when attempting to grade it, please confirme that a) there are artifacts uploaded to the portfolio, and b) the artifacts are set to be visible/assessable in the gradebook.
There are additional database system settings that allow an organization to define who can control the visibility of portfolio artifacts in a gradebook. The options include making all artifacts assessable by default, allowing the learner to control which are assessable and allowing the advisor to control which are assessble. All three settings are enabled by default. There is an additional database setting to control whether you can view portfolio comments when accessing the portfolio via a gradebook. This setting is off by default and if you'd like it enabled you should speak to a developer.
To remove a portfolio from an assessment click 'Remove Portfolio'.
Assessment Form allows you to link an existing assessment form to the gradebook assessment. This permits online, electronic grading by faculty. (If you need to create a form navigate to Admin > Assessment and Evaluation > Forms. Please see more detail in the Assessment and Evaluation section.)
As of ME 1.18, forms attached to gradebook assessments will be visible to learners once completed, and regardless of whether a drop box is used. Learners do not see a blank copy of the form before their grade is complete. To allow learners to view a form to be used for grading it is recommended that you download a PDF of the blank form and post it to the course website or a learning event.
If you add a rubric item to a form, please ensure you have made a grouped item (even if it is just one line). A form with just a single rubric attribute attached will not display properly when attached to the gradebook.
Do not include other item types like date selector, numeric answer field, or autocomplete (multiple responses) on a form to be attached to a gradebook. They will not work. (Even if it seems like the system lets you add a form with these items, and even though an admin. user can complete the form, faculty graders will not be able to use the form via My Grading Tasks.)
To provide a form for graders to use in the gradebook:
Click 'Attach Assessment Form'.
Begin to type the form title and options should appear. Click on the form you wish to attach and click 'Attach Assessment Form'.
The assessment form will now appear on the assessment screen.
You must indicate a score for each possible response on a rubric and give a weight for items on the assessment form (a free text item will have no weight). The weights should total 100%. This information is what allows the system to automatically create a grade after the form is complete.
Click 'Save'. The form will be attached to the assessment and you'll be directed to the main Grade Assessment page where you can input grades.
To remove an attached assessment form, click the red "Remove Form" button.
You must have permission to access the form you are attempting to attach to a gradebook. To manage form permissions a user with access to the form needs to go to Admin > Assessment and Evaluation > Forms.
Assessment Objectives allows you to map anything in your Curriculum Tags sets to an assessment.
The Curriculum Tag Selector is hidden by default. Click the greyed out Assessment Objectives heading to open it.
The tag selector will be filtered by course by default. Curriculum tags assigned to the course will display for you to select from.
To remove the course filter and access all curriculum tag sets in your organization, click Filter by Course and deselect 'Course'. Click the Filter By button to close the modal.
Click the magnifying glass to search for a specific curriculum tag.
After finding the appropriate curriculum tag, click the green plus sign to assign a curriculum tag to the gradebook assessment.
Selected tags will appear on the right side "Associated Curriculum Tags" list.
To add a context-based link, save the assessment and reopen the edit screen. You'll now be able to assign context-based linkages by clicking the link icon.
Pick Draft or Publish to indicate whether you want to finalize the assessment or leave it in draft mode. Once published, an assessment can still be edited, however if it is already shown in a learner gradebook, learners may see any changes made.
Click Save.
By default, when you save your work the system will redirect you to the Grade Assessments page where you can input student marks depending on your user permissions. To select a different destination after saving use the dropdown menu immediately to the left of the blue "Save" button.
If you have multiple assessments in a gradebook that share multiple details (e.g. graders, groups, weight, etc.) it may be fastest to create one assessment then copy it multiple times and adjust each copy as needed to reflect the unique assessments required.
When creating as assessment in the gradebook you can create a group assessment. This will allow learners to upload one assignment (if you use a drop box) on behalf of their whole group and when a grader grades the assignment, the grade will be applied to all group members.
If you use this tool, graders can still tweak individual grades after the group grade has been entered.
To use this feature, you must have course groups built. Please see the Course>Groups page for more detail.
In the 'Audience Options' section, assign the assessment to specific course groups (include all groups if an entire course is responsible for completing the assessment).
If you want learners in the same group to get the same grade, check the box.
Click the 'X' beside the search or somewhere outside the selection window to close it.
The selected groups will display on a list below the "Select Audience" dropdown.
To remove a group from the list, click the 'x' beside the group name.
Begin to type a grader name into the search field and when matches appear, click on the appropriate name and select Add.
You may add multiple graders to one assessment.
To assign groups to graders, click the checkbox beside multiple group names and click 'Assign Selected to Grader'.
In the popup window, click the checkbox beside the appropriate grader name click 'Assign Learner'.
The names of individual learners in each group should appear beside the grader name in the Grader/Assigned Learners table on the left.
To delete a learner from a grader's list, click the red minus icon. Note that the learner will not be added back to learner's list since it only shows groups. If you remove an individual learner from a grader's list you need to ensure the student gets graded some other way.
To attach a quiz to a gradebook assessment it must first be attached to a learning event. You will only be able to add a quiz to a gradebook assessment if the gradebook and learning event the quiz is attached to share a curriculum period.
Create a gradebook assessment using the instructions in the Gradebook help section.
Click the checkbox beside Link existing online quizzes to this assessment.
Click 'Add Quiz'.
Begin to type the quiz name and select it from the displayed list. The list of quizzes displayed will be based on quiz authorship so you must be listed as a quiz author to add a quiz to a gradebook.
Click 'Attach Quiz'.
The quiz questions will display and you can uncheck any that you do not wish to include.
Set the other parameters for the assessment and click 'Save.' Note that you do not need to set graders for a quiz since a quiz only allows multiple choice questions which will automatically graded.
After the quiz is completed by learners, use the Import/Export tool to import grades from the attached quiz.
Note that the gradebook will record the learner's first attempt of the quiz, even if they are allowed multiple attempts.
If you attach a quiz to a gradebook assessment you can edit the questions once. If you need to edit them again, you should delete and reattach the quiz.
You can attach an exam to a gradebook assessment from the gradebook or from an exam post. Doing this creates a link between the two so that exam grades will automatically populate the gradebook.
Please note that if you include questions in an exam that need to be manually graded (e.g., short answer), student grades will initially be calculated and displayed in the gradebook without including their possible points from those questions. As such, it is recommended that if you include manually graded questions, you delay the gradebook assessment visibility to learners until you know the exams will be graded.
To attach an exam to a gradebook assessment the exam must first be posted to an event in the appropriate curriculum period. The curriculum period for the gradebook and the event to which the exam is posted must match.
Create a gradebook assessment using the instructions in the Gradebook help section.
Click the checkbox beside Link existing online exam to this assessment.
Click 'Add Exam Post'.
Begin to type the name of the exam and select it from the displayed list.
Click 'Attach Exam Post'.
Note that you have a new item to configure which is exam scoring method. Your options are to: show average of all scores, show first score, show highest score, or show latest score in the gradebook. These options only apply if you set the exam to be taken multiple times by learners.
Set the other parameters for the assessment and click 'Save.' Note that you do not need to set graders for an exam in the gradebook assessment since you add graders to specific exam posts in the Exams module.
When the exam is completed and grading is complete (if required) the grades will automatically display in the gradebook.
It is possible to attach more than one exam post to a single gradebook assessment. This might be useful if you have two sections of learners writing the exam at different times but the grades will populate the same gradebook assessment.
Note that when you attach an exam to the gradebook from the edit assessment page, the system automatically determines the point total based on the number of questions on the exam (e.g. 5 questions = 5 points) if you are using a numeric marking scheme.
If you wish to attach an exam to a gradebook assessment from an exam post you will do so on Step 4:Feedback. *Attach GradeBook: Select an existing gradebook entry to attach the exam to (the list will prepopulate based on the course and event selected in earlier steps and the contents of the gradebook for the relevant curriculum period). Note that you can't set the exam scoring method from here; you must navigate to the gradebook assessment to do so.
